10 Ton Cooling Tower Systems - Whaley Products, Incorporated

10 ton cooling towers in open or closed loop designs with pumps, tanks, filtration and heat exchangers customized for your heat removal needs. Cool your industrial process with an efficient cooling tower from Whaley Products, Inc. Contact a Whaley sales engineer to determine which system meets your heat removal needs and get a quote today.

Configurations

Features

Contact

Options

Quote

10 Ton Cooling Tower

01A Whaley Open Loop Cooling Tower no Sub-Frame

This unit is an evaporative, open loop induced draft cooling tower system, which is typically installed outdoors. The cooling tower is factory mounted on an epoxy coated steel sub-frame with fork slots and lifting eyes. Other configurations are available if a steel legs to elevate the tower is required for your project. A pump for circulating this cooling tower is not included in this quote. If a pump and/or controls are required, Whaley can provide these items as a packaged skid configuration with this cooling tower or as shipped loose optional adder items.

For More Information Click Here

DESCRIPTION

10 Ton Cooling Tower

01B Whaley Open Loop Cooling Tower on Sub-Frame

For More Information Click Here

DESCRIPTION

10 Ton Cooling Tower

02 Whaley Elevated Open Loop Cooling Tower

For More Information Click Here

DESCRIPTION

10 Ton Cooling Tower

03 Whaley Packaged Open Loop Cooling Tower

This unit is an evaporative, open loop induced draft cooling tower system, which is typically installed outdoors. The cooling tower module is factory mounted on an epoxy coated steel frame with fork slots and lifting eyes. Also included on the frame is a cooling tower circulation/supply pump that will pull from the tower’s lower water basin, circulate the down-stream application, and return to the cooling tower. Additionally, a full flow flushable stainless-steel strainer is included to strain the cooling tower water prior to going to the down-stream application. Also included are the controls to run the pump and tower fan.

For More Information Click Here

DESCRIPTION

10 Ton Cooling Tower

04 Whaley Open Loop Cooling Tower with Pump-Strainer-Controls Skid

This complete system is made up of an Evaporative Open Loop Induced Draft Cooling Tower Module and a Pump-Strainer-Controls Skid. Evaporative Open Loop Induced Draft Cooling Tower Module: The cooling tower module is factory mounted on an epoxy coated steel frame with fork slots and lifting eyes. Pump-Strainer-Controls Skid: The Pump-Strainer-Controls Skid includes a cooling tower circulation/supply pump that will pull from the tower’s lower water basin, circulate the down-stream application, and return to the cooling tower. Additionally, a full flow flushable stainless-steel strainer is included to strain the cooling tower water prior to going to the down-stream application. Also included are the controls to run the pump and tower fan.

No Image Provided
For More Information Click Here to Contact Us For More Information Click Here

DESCRIPTION

10 Ton Cooling Tower

05 Whaley Open Loop Cooling Tower (Elevated Tower with T-Series Pump Tank System) – Model WP650-10-T100-X-2PT

This complete system is made up of an Evaporative Open Loop Induced Draft Cooling Tower Module and a Cooling Tower Pump Tank System. Evaporative Open Loop Induced Draft Cooling Tower Module: This unit is an evaporative, open loop induced draft cooling tower system, which is typically installed outdoors. The cooling tower is factory mounted on an epoxy coated steel sub-frame with fork slots and lifting eyes with steel legs to elevate the tower. The steel legs allow the cooling tower water to gravity return back to the Cooling Tower Pump Tank System included in this quote. Cooling Tower Pump Tank System Skid: The second component is the Cooling Tower Pump Tank System, which is typically installed indoors. This system contains a water reservoir and pumps.

For More Information Click Here

DESCRIPTION

10 Ton Cooling Tower

06 Whaley Closed Loop Single Skid Cooling Tower

This unit is an evaporative, closed loop induced draft cooling tower system, which is typically installed outdoors. The cooling tower module is factory mounted on an epoxy coated steel frame with fork slots and lifting eyes. Also included on the skid is a Cooling Tower/Heat Exchanger Circulation Pump (CTHXP), Flushable Stainless Steel Strainer, Heat Exchanger, and Master Control Panel & Disconnect Package. The Cooling Tower / Heat Exchanger Circulation Pump (CTHXP) is set up to circulate only the cooling tower side (cold side) of the system’s heat exchanger. A field supplied pump is to provide circulation through the customer’s application side (hot side) of the heat exchanger.

For More Information Click Here

DESCRIPTION

10 Ton Cooling Tower

07 Whaley Closed Loop Series with Separate Pump Station Heat Transfer Skid

This complete closed loop cooling tower system is made up of an Evaporative Induced Draft Cooling Tower Module and a Pump Station Heat Transfer Skid. Evaporative Induced Draft Cooling Tower Module: The cooling tower module is factory mounted on an epoxy coated steel frame with fork slots and lifting eyes. Pump Station Heat Transfer Skid: The Pump Station Heat Transfer Skid includes a cooling tower/heat exchanger circulation pump that will pull from the tower’s lower water basin, circulate the plate and frame heat exchanger, and return to the cooling tower. Additionally, a full flow flushable stainless-steel strainer is included to strain the cooling tower water prior to going through the plate and frame heat exchanger. Also included are the controls to run the pump and tower fan.

For More Information Click Here No Image Provided
For More Information Click Here to Contact Us

DESCRIPTION

10 Ton Cooling Tower

08 Whaley Closed Loop Indoor/Outdoor Cooling Tower with Indoor Heat Transfer Pump Tank System

This complete closed loop cooling tower system is made up of an Evaporative Induced Draft Cooling Tower Module and a Cooling Tower Heat Transfer Pump Tank System. Evaporative Induced Draft Cooling Tower Module: This unit is an evaporative induced draft cooling tower system, which is typically installed outdoors. The cooling tower is factory mounted on an epoxy coated steel sub-frame with fork slots and lifting eyes with steel legs to elevate the tower. The steel legs allow the cooling tower water to gravity return back to the Cooling Tower Heat Transfer Pump Tank System included in this quote. Cooling Tower Heat Transfer Pump Tank System Skid: The second component is the Cooling Tower Heat Transfer Pump Tank System, which is typically installed indoors. This system contains a water reservoir, plate and frame heat exchanger, and pumps. One pump (cooling tower circulation pump) circulates the cooling tower to keep the Cooling Tower

For More Information Click Here

DESCRIPTION

10 Ton Cooling Tower

09 Whaley Closed Loop Single Skid Cooling Tower with Process Side Pump Tank (ONE SKID)

Evaporative Induced Draft Cooling Tower Module: This unit is an evaporative induced draft cooling tower system, which is typically installed outdoors. The cooling tower module is factory mounted on an epoxy coated steel frame with fork slots and lifting eyes. Also included on the skid is a Cooling Tower/Heat Exchanger Circulation Pump (CTHXP), Flushable Stainless Steel Strainer, Heat Exchanger, and Master Control Panel & Disconnect Package. Process Supply Pump Tank System Skid: The second component of this single skid system is the Process Supply Pump Tank System. This system contains a water reservoir and pumps. The heat exchanger circulation pump (HXCP) circulates the heat exchanger to keep the Process Supply Pump Tank System’s reservoir at the target set point temperature.

For More Information Click Here No Image Provided
For More Information Click Here to Contact Us

DESCRIPTION

10 Ton Cooling Tower

10 Whaley Closed Loop Indoor/Outdoor Cooling Tower with Indoor Heat Transfer Pump Tank System and Process Side Pump Tank System

This complete closed loop cooling tower system is made up of an Evaporative Induced Draft Cooling Tower Module and a Cooling Tower Heat Transfer Pump Tank System. Evaporative Induced Draft Cooling Tower Module: This unit is an evaporative induced draft cooling tower system, which is typically installed outdoors. The cooling tower is factory mounted on an epoxy coated steel sub-frame with fork slots and lifting eyes with steel legs to elevate the tower. The steel legs allow the cooling tower water to gravity return back to the Cooling Tower Heat Transfer Pump Tank System included in this quote. Cooling Tower Heat Transfer Pump Tank System: The second component is the Cooling Tower Heat Transfer Pump Tank System, which is typically installed indoors. This system contains two components.

For More Information Click Here No Image Provided
For More Information Click Here to Contact Us

DESCRIPTION

01A TOWER NO STEEL SUB-FRAME

CHOOSE CLOSED-LOOP CONFIGURATIONS

01B TOWER ON STEEL SUB-FRAME

02 TOWER ON STEEL SUB-FRAME, & STEEL LEGS/CROSSED BRACING TO ELEVATE

03 PACKAGED OPEN-LOOP COOLING TOWER SYSTEM

04 TOWER ON STEEL SUB-FRAME, AND SEPARATE SKID WITH PUMP, STRAINER, CONTROL PANEL PACKAGE

05 TOWER ELEVATED WITH T-SERIES PUMP TANK SYSTEM

10 CLIO-SERIES SYSTEM WITH ELEVATED TOWER WITH THX-SERIES CLOSED LOOP HEAT TRANSFER PUMP TANK SKID WITH PROCESS SIDE PUMP TANK

06 CLOSED LOOP SINGLE-SKID SYSTEM

07 CLS-SERIES SYSTEM WITH TOWER ON STEEL SUB-FRAME, & SEPERATE THX-SERIES PUMP STATION/HT SKID

08 CLIO-SERIES SYSTEM WITH ELEVATED TOWER WITH THX-SERIES CLOSED LOOP HEAT TRANSFER PUMP TANK SKID

09 CLOSED LOOP COOLING TOWER SYSTEMS WITH PROCESS SIDE PUMP TANK SYSTEM (ON ONE SKID)

CHOOSE OPEN-LOOP CONFIGURATIONS

Contact a Whaley Sales Engineer today for more information.

Get a Quote

10-Ton Cooling Towers

10 Ton Cooling Tower Standard Features

Stainless Steel Fan Shroud Ring

Low Horsepower Direct Drive Fan Motor

Crossflow Cellular Drift Eliminators

Extended Life Fixed Orifice Spray Nozzle

Anti-vortex Internal Flow

Fiberglass Reinforced Polyester (FRP) Outer Shell

Cellular Inlet Louvers

Industrial Steel C-channel Base Frame

Brass Water Make-up Valve

Large Volume Water Basin

PVC Outlet Connection Tank Adapter

Cross-fluted Film Media

All Stainless Steel Hardware

PVC Inlet Connection

Ultraviolet (UV) Inhibitor Additive to Composite Matrix

10 Ton Cooling Tower Options

Controllers

Thermal Wells

Strainers & Filtration

Variable Frequency Drives

Basin Heaters

Electrical Disconnects

Extra Fittings

Tanks

Pumps

Elevation Packages

Contact Us Today!

Have a question? Need a quote? Sales Engineers are standing by to help.

Simply fill out our form, or give us a call at 940-569-4116.

At Whaley Products, Inc. we manufacture quality industrial 10 ton cooling tower systems for a wide range of processes and applications. A commitment to precision engineering and innovative design have made Whaley Chillers the choice of Industry Leaders.

Contact a Whaley Sales Engineer today for more information.

Get a Quote